Printer Friendly Tell a Friend

DVH NP All in One Advanced BioPellets :: Reviews

Price$0.00excl. TAX
Reward Credits$0.00
Select Type:
Qty
Weight0.01 kg
All in One Biopellets
Remove No3 and Po4
2019 Jan
Our BioPellets is the Latest Version, new dissolve formula 


Previously, Reef Interests was the first to develop and present the NP reducing BioPellets which are mostly removing Nitrogen waste products and along with a smaller amount of Phosphates. DVH has been hard at work developing a new and better product called All-In-One BioPellets.


After 4 years of development and research DVH is very pleased to be able to present the Reef Interests All-In-One Biopellets (Patent Pending), which can be used to more efficiently remove both Nitrogen (5x) as well as Phosphates (10x-20x) without the need of using separate phosphate removing substrates. Now for the 1st time there is no need to have to purchase expensive GFO media for PO4 reduction and Biopellets for Nitrate reduction. With this All-In-One simple to use product, Reef Interests All-In-One BioPellets will do it all at an affordable cost with no need for 2 seperate reactors for GFO and Biopellets.

The positive effects of NP-reducing BioPellets on water quality are based on the principle of immobilization. Waste products from the water, mainly nitrate and phosphate, are converted into bacteria. This process keeps the aquarium water clean. The new formula All-In-One Biopellets are composed of highly purified compounds, to ensure the safe use of Reef Interests products in marine tanks occupied by sensitive and precious animals such as corals, invertebrates, fish etc…

The pellets will allow aerobic growth of bacteria which consequently will consume nitrate and phosphate simultaneously. The bacteria will use up the carbon from the Reef Interests All-In-One BioPellets whilst nitrogen and phosphorus are taken from the water as nitrate and (ortho)phosphate. This conversion of organic BioPellets (together with inorganic nitrogen and phosphorus) into microbial biomass is called immobilization. In contrast to our “old” Biopellets, we have observed that the All-In-One Biopellets work best with very high water flow.

How to Use:

Reef Interests reccomends soaking All-In-One Biopellets for a period of 24 hours in marine aquarium water before use in your aquarium reactor. This will insure more uniform tumbling once added to the reacotor. All-In-One BioPellets is heavier than NP BioPellets and it requires a higher flow rate to tumble the media. For example, a 700 liter tank (185 gallons) with a fluidized filter containing 2 liter of All-In-One Biopellets will require a minimal flow through of 2000-3000 l/h (528-792 GPH).

Results after 10 months: The bioload on a 700 liter aquarium (185 gallons) contains approximately 50 fish and after 10 months of testing both nitrates and phosphates were undetectable with standard nitrate and phosphate aquarium test kits with the use of 2 liters of media.

The surplus of bacteria will be consumed by filter and suspension feeding organisms, such as sponges and corals, or skimmed off by a protein skimmer. In addition, with a high feeding regime, Reef Interests advises to use a simple filter sponge on the outlet of your fluidized filter to remove excess of bacteria which will otherwise cloud your water slightly.

On average the All-In-One Biopellets takes 1-4 weeks to give rise to sufficient bacteria to allow nitrate and phosphate levels to drop. Importantly, allow your aquarium inhabitants to adjust to their new environment by slowly increasing the level of BioPellets over a period of several weeks. Add extra pellets every 3-6 months dependent on Biopellet consumption and levels of NO3 and PO4.

Filtered By 2 - Poor 3 - Average 1 - Bad Found: 0
Rate it
Name
Email
One-line summary
Your Review
Validation Code

Name
Email
Your Question
Validation Code

No questions were found