TDS Meter Pen

TDS is Monitor for check your water include any solids item in your water.  A High Level TDS level in the water.  It's probability of harmful contaminants can got a health risk of your tank!

Make sure using pure water to change your Tanks!

FEATURES

• Ideal for Aquarium use check out the cleaning water
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. a
• Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
• Built-in digital thermometer
• Display: large and easy-to-read LCD screen.
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
• Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).

SPECIFICATIONS

• TDS Range: 0 - 9990 ppm (mg/L)
• Temp. Range: 0 - 80 degrees Celsius
• Resolution: 1 ppm, 1 degree Celsius (also available in 10 ppm)
• Accuracy: +/- 2%
• ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)
• Power source: 2 x 1.5V button cell batteries (included)
• Battery life: 1000 hours of usage
• Dimensions: 14 x 1.5 x 2.3cm
• Weight with case: 32g
• IS09001 with CE, EU Cert

A good Aquarium Water Tank water suitable for below "30"

How to Use ?

Put the TDS Meter in water, just maxium immersion level. Do not drop full item into the water.